Monday 15 August 2011

First thing tomorrow morning:

We have to sort out the scale - otherwise all our work would have been in vain.
I see two posts on it and that is not possible, so unless this is fixed we cannot start on the model I guess.
We need clarity on this more than on anything else.

5 comments:

  1. Problem was some of our rooms in the hospital were so tiny that with our previous scale, the dimensions were turning out to be like 0.3cm x 0.6 cm and we were finding it far too small for the model. However, the education group had already begun with the old scale. So for the hospital, we have calculated measurements for both scales. Whichever scale is finally chosen, we'll have back-up.

    ReplyDelete
  2. Aarghh, we've started the model though!

    ReplyDelete
  3. Yeah and so have they. Don't worry, I have all the measurements for both scales and I figured out an easy enough way to make the rooms quickly. We'll have to use normal paper anyway; any other paper will be too thick for our room sizes. Will show you tomorrow morning.

    ReplyDelete
  4. what we could do is.. make our interiors with the 30 cms scale and the outside building and the roads on the 21 scalee.. that only makes sense for us..

    ReplyDelete
  5. I think I found a really easy way to do the scaling and stuff for making the 3D rooms. And I THINK it'll be easy enough that half of us can work on the 21 version and the other half on the zoomed in versions.

    ReplyDelete